Basic Info
Model NO.: ISS-20
Structure: Zinc Oxide Arrester
Application: AC/DC System
Operation Voltage: Low Voltage
Material: ZnO
Brand:INYAN
Maximum Discharge Current Imax(8/20): 40ka
Working Voltage: DC1200V
Voltage Protection Level up: Less Than 3.5kv
Indication Method: Indication Window,Turn Red When Malfunction
Remote Alarm Function: on/off
Transport Package: Packed by Carton
Origin: Nanning City, Guangxi, China
Type: Power Source Arrester
Installation: Parallel Arrester
Size: Small
Shape: Cuboid
Certification: ROHS, ISO9001, CCC, Ce
Nominal Discharge Current in(8/20): 20ka
Protection Class of Shell: IP20
Protection Mode: +-PE, - -PE, + - -PE
Respond Time Ta: Less Than 10ns
Flame Retardant Rating of Outer Shell: UL94-V0
Trademark: Dikai
Specification: IEC61643, ISO9001: 2008
HS Code: 8536300000
Product Description
DIN Rail PV Solar 120V 700V 1200V DC Surge Protective Device
Product Introduction
module PV Series DC surge protection device (short for SPD) can be installed in front of the low-voltage distribution system. It can prevent the system and equipments from the permanent damage caused by induced over-voltage, over current, and other induced surge voltage. It meets the IEC and GB18802.1 standards. The quality control is under strict ISO9001 Quality Assurance system.
This product uses high temperature and resistant flame retardant plastic shell. It takes the features of good sealing, good appearance, easy installation, dustproof anticorrosion flame retardant, long service life under a harsh environment etc.
It is designed as module with 35mm electrical lead rail. Each line of SPD module has working indicator window. When the indicator window shows green, the SPD is normal, shows red, the SPD is failure.
With temperature control breaker, build-in over current fuse protector, thermal inductance breaker and degradation automatic release, it can avoid the fire danger. With remote alarm connector, it can facilitate remote monitoring and realize automation management. Its protection mode is L-PE.
Technical Parameter
| Product | DC Surge Protector device |
| Product type | DKG-30(20,40,60)/1000 3P |
| Applicable Power Supply System | Low Voltage System |
| Maximum Continuous Operating Voltage Uc | DC1000V&1200V&500V |
| Nominal Discharge Current (8/20μs) | 15KA&10KA&20KA&30KA |
| Maximum Discharge Current(8/20μs) | 30KA&20KA&40KA&60KA |
| Voltage Protection Level Up | ≤3.2KV |
| Leakage Current | ≤30Ua |
| Respond Time tA | ≤10ns |
| Indication Method | Indication Window,Turn Red When Malfunction |
| Remote Alarm Function | On/off |
| Maximum Connection Wire Range | BVR 25mm2 |
| Method of Installation | 35mm Din Rail Mounted |
| Material of Shell | PA6 |
| Flame Retardant Rating of Outer Shell | UL94-V0 |
| Protection Level of Outer Shell | IP20 |
| Working Temprature | -25~+70oC |
| Relative Humidity | ≤95%RH |
| SPD Type | One-port SPD(Parallel) |
Application Scope
Suitable for Lightning Protection of Solar Energy DC Power Distribution System.
About INYAN Company
-More than 10 years specialized.
-25,000 square metres industrial park.
-More than 100,000 cases of lightning protection project services.
-Five series lightning protection products, more than 160 items.
-ISO, OHSAS & CE certificated.
-CNAS National Laboratory.